Low strain integrity tests in piles – 1-D and 3-D numerical modeling and comparisons with results obtained in the field

Auteurs

  • Rodrigo Paulo Strano Pasqual Universidade Federal do Paraná
  • Alessander Christopher Morales Kormann Universidade Federal do Paraná

DOI :

https://doi.org/10.33837/msj.v2i3.878

Résumé

The risks associated with integrity problems in piles led to the inclusion of this matter in international standards. One of the tests available to evaluate piles integrity is known as low strain integrity test. Low costs, simple and fast execution and no waste generation are some of the main advantages of this test. However, between others, soil and reinforcement of the pile may affect the results and cause some difficulty to interpret them. In this paper two numerical models based on Finite Elements Method are presented: 1-D and 3-D. The results obtained in the numerical simulations of the tests are compared with those obtained in the field with focus in two main aspects: the signals attenuation effects and the reflections in the transition between the reinforced part of the pile and the part in simple concrete.

Bibliographies de l'auteur

Rodrigo Paulo Strano Pasqual, Universidade Federal do Paraná

Engenheiro Civil, Mestrando em Engenharia de Construção Civil (PPGECC), Universidade Federal do Paraná

Alessander Christopher Morales Kormann, Universidade Federal do Paraná

Professor Dr., Departamento de Construção Civil, Universidade Federal do Paraná

Références

Ambrosini, D., Ezeberry, J. (2005). Long piles integrity through Impact Echo technique. In Proceedings of the 8th Congreso Argentino de Mecánica Computacional, Buenos Aires, Argentina, 2005 (pp. 651-669).

Bowles, J. E. (1977). Foundation analysis and design. New York: McGraw Hill, Ltda.

Chai, H.Y., Wei, C.F., Phoon, K.K., Yang, Y.M. (2011). Some observations on the performance of the signal matching technique in assessment of pile integrity. Journal of Nondestructive Evaluation, 30(4), 246-258.

Chopra, A. K. (1995). Dynamics of structures: Theory and Applications to Earthquake Engineering. New Jersey: Prentice Hall.

Chow, Y. K., Phoon, K.K., Chow, W.F., Wong, K.Y. (2003). Low Strain Integrity Testing of Piles: Three-Dimensional Effects. Journal of Geotechnical and Geoenvironmental Engineering, 129(11), 1057-1062.

Cosic, M., Folic, B., Folic, R. (2014). Numerical simulation of the pile integrity test on defected piles. Acta GeotechnicaSlovenica, 11 (2), 4-19.

Ding, X., Liu, H., Liu, J., Chen Y. (2011). Wave propagation in a pipe pile for low-strain integrity testing. Journal of Engineering Mechanics, 137 (9), 598-609.

Fekadu, P. (2010). Simulating the dynamic response of a soil-pile system using ABAQUS. (Dissertação). University of Technology, Göteborg, Suécia.

Finno, R. J., Gassman, S. L., Osborn, P. W. (1997). Non-destructive evaluation of a deep foundation test section at the Northwestern University national geotechnical experimentation site. In A Report Submitted to the Federal Highway Administration Office, Northwestern University, Evanston, Illinois, 1997.

Fischer, J., Missal, C., Breustedt, M., Stahlman, J. (2010). Numerical simulation of low-strain integrity tests on model piles. In Benz & Nordal (Eds), Numerical Methods in Geotechnical engineering (pp. 655-660). London: Taylor and Francis Group.

Hertlein, B., Davis, A. (2006). Nondestructive Testing. Chichester, West Sussex, Inglaterra: John Wiley & Sons Ltd.

Hetland, J. (2015). Numerical Modelling of a Pile Model Test with Focus on Small-strain Stiffness. (Dissertação). Norwegian University of Science and Technology, Noruega.

Hilber, H. M., Hughes, T. JR., Taylor, R. L. (1977). Improved numerical dissipation for time integration algorithms in structural dynamics. Earthquake Engineering & Structural Dynamics, 5 (3), 283-292.

Hou, S.W., Hu, S.J., Guo, S.P.,Zeng, Y.Q. (2016).The Research of Multi-defective Piles for Low Strain Testing and Numerical Simulation. In The 2016 Structures Congress, Jeju Island, Coréia.

Klingmüller, O., Kirsch, F. A. (2004). Quality and Safety Issue for Cast-in-Place Piles-25 Years of Experience with Low-Strain Integrity Testing in Germany: From Scientific Peculiarity to Day-to-Day Practice. In Current Practices and Future Trends in Deep Foundations, (pp. 202-221).

Kramer, S. L. (1996). Geotechnical earthquake engineering. India: Pearson Education.

Liao, S. T., Roesset, J. M. (1997). Dynamic response of intact piles to impulse loads. International Journal for Numerical and Analytical Methods in Geomechanics, 21 (4), 255-275.

Lu, Z. T., Wang, Z. L., Liu, D. J. (2013). Study on low‐strain integrity testing of pipe‐pile using the elastodynamic finite integration technique. International Journal for Numerical and Analytical Methods in Geomechanics, 37 (5), 536-550.

Luo, W., Chen, F., Hu J. (2010). Improvement of Low Strain Pile Integrity Test. In Proceedings of the ASEE (American Society of Engineering Education) Conference, Beijing, China,2010 (pp. 583-589).

Lysmer, J. F. E. R., Richart, F. E. (1966). Dynamic Response of Footings to Vertical Loading. Journal of the Soil Mechanics and Foundations Division, 92(1), 65-91.

Newmark, N. M. (1959). A method of computation for structural dynamics. Journal of Engineering Mechanics, ASCE, 85 (3), 67-94.

Ni, S.H., Lehmann, L., Charng, J. J., LO, K.-F. (2006). Low-strain integrity testing of drilled piles with high slenderness ratio. Computers and Geotechnics, 33 (6), 283-293.

Novak, M. (1974). Dynamic stiffness and damping of piles. Canadian Geotechnical Journal,11(1), 574-598.

Ordóñez, J. A. R., Botero, V. H. R. (2010). Análisis espectral de propagación de ondas para análisis de pruebas de integridad de pilotes. Ingenieria y Universidad, 10 (2), 1-10.

Peiris, T. P. (2014). Soil-Pile Interaction of Pile embedded in Deep Layered Marine Sediment under Seismic Excitation. (Tese de doutoramento). Queensland University of Technology, Brisbane, Austrália.

Plassmann, B. (2001). Zur Optimierung der Messtechnik und der Auswertemethodik bei Pfahlintegritätsprüfungen. (Tese de doutoramento). Universidade Técnica Carolo-Wilhelminazu Braunschweig, Nürnberg, Alemanha.

Rausche, F., Likins, G., Hussein, M. (1994). Formalized procedure for quality assessment of cast-in-place shafts using sonic pulse echo methods. Transportation research record, 1 (1), p. 30-30.

Rausche, F., Likins, G., Kung, S. R. (1992). Pile integrity testing and analysis. In Proceedings of the 4thInternational Conference on the Application of Stress-Wave Theory to Piles, Holanda, 1992 (pp. 613-617).

Schauer, M., Langer, S. (2012). Numerical simulations of pile integrity tests using a coupled FEM SBFEM approach. PAMM, 12 (1), 547-548.

Simons, H.A., Randolph, M.F. (1985). A New Approach to One-Dimensional Pile Driving Analysis. In Proceedings of the 5thInternational Conference on Numerical Methods in Geomechanics, Nagoya, Japão, 1985 (pp. 1457-1464).

Smith, E.A.L. (1960). Pile-Driving Analysis by the wave equation. ASCE Paper, 127(3306), part I.

Stroud, M. A. (1989). The standard penetration test – its application and interpretation. In Proceedings of the Conference on Penetration Testing in the UK, Londres, Inglaterra, 1989.

Wang, Z., Wu, Y., Xiao, Z. (2014). Numerical Assessment of Factors Affecting Waveform Based on Low Strain Testing of Piles. Open Civil Engineering Journal, 8 (1), 64-70.

Yan, N. (2015). Numerical Modelling and Condition Assessment of Timber Utility Poles using Stress Wave Techniques. (Tese de doutoramento). University of Sidney, Austrália

Yu, C.P., Liao, S.T. (2006).Theoretical basis and numerical simulation of impedance log test for evaluating the integrity of columns and piles. Canadian geotechnical journal, 43 (12), 1238-1248.

Téléchargements

Publiée

2020-01-21

Comment citer

Pasqual, R. P. S., & Kormann, A. C. M. (2020). Low strain integrity tests in piles – 1-D and 3-D numerical modeling and comparisons with results obtained in the field. Multi-Science Journal, 2(3), 1–8. https://doi.org/10.33837/msj.v2i3.878

Numéro

Vol. 2 No 3 (2019)

Rubrique

Other Areas of Knowledge

Licence

Authors who publish in this journal agree to the following terms:

a)      The Authors retain the copyright and grant the journal the right to first publication, with the work simultaneously licensed under the Creative Commons Attribution License that allows the sharing of the work with acknowledgment of authorship and initial publication in this journal.

b)     Authors are authorized to assume additional contracts separately, for non-exclusive distribution of the version of the work published in this journal (eg, publishing in institutional repository or as a book chapter), with acknowledgment of authorship and initial publication in this journal.

c)      Authors are allowed and encouraged to publish and distribute their work online (eg in institutional repositories or on their personal page) at any point before or during the editorial process, as this can generate productive changes, as well as increase impact and citation of the published work.